Dynatrace Managed release notes version 1.262

Rollout start: Mar 20, 2023

These release notes relate to Dynatrace Managed specific changes. To learn about general Dynatrace changes included in this Dynatrace Managed release, see:

New features and enhancements

New branding logo in Managed deployments

Starting with this release, all Managed deployments will contain a new branding logo.

Mission Control

Managed Mission Control with new managed branding logo.

Environment

Managed environment with new managed branding logo.

To find the Dynatrace Managed release version, go to the user menu for your account information. The contents of your user menu depend on your configuration and permissions.

User menu showing Managed branding and version

Dynatrace Self-Monitoring (Managed) extension/dashboard 1.7.0

Version 1.7.0 of the Dynatrace Self-Monitoring (Managed) extension/dashboard is now available via Dynatrace Hub. This version corrects an issue with RUM user session tiles.

Operating systems support

    Current Dynatrace Managed operating systems support changes

    The following operating systems will no longer be supported starting 01 November 2024

    Past Dynatrace Managed operating systems support changes

    The following operating systems are no longer supported since 01 July 2024
    The following operating systems are no longer supported since 01 August 2024
    The following operating systems are no longer supported since 01 October 2024

    Resolved issues

    General Availability (Build 1.262.154)

    The 1.262 GA release contains 35 resolved issues (including 1 vulnerability resolution).

    Component
    Resolved issues
    3
    2
    20
    2
    1
    1
    1
    2 (1 vulnerability)
    2
    1

    Application Security

    • On the "Third-party vulnerabilities" page, added maximum length validation for the "Snyk/CVE ID" and "Tag" filters to prevent a Bad Request error page when input is longer than 48 characters. (RSA-8496)
    • Fixed an issue where the security problem does not have a management zone and the user selects a management zone which is not affected by security problem it will show the error page, which is stating that the security problem cannot be displayed. (RSA-8397)
    • Fixed an issue where the font size on the CLV page for muted vulnerabilities is too large. (RSA-8340)

    Autonomous Cloud

    • Fixed an issue where the link to the 'Access tokens' page at "Monitor Kubernetes / Openshift" wizard was malfunctioning. (K8S-4850)
    • The "Monitor Kubernetes / OpenShift" deployment page now references the newly released Dynatrace Operator v0.10.3. (K8S-5162)

    Cluster

    • Severity of logs "ActiveGate not found" and "failed to assign config to ActiveGate" changed from "Warning" to "Error". (EXT-3710)
    • Users can now search for logs containing tabulations. (LOG-2280)
    • Fixed an issue with missing metrics, such as Time in GC, Gen 0, and Gen 1 for their .net process. (TI-4875)
    • Dashboard markdown links that pointed to other dashboards and referenced "gtf=defaultTimeframe;gf=deafultManagementZone" are migrated to the new default params. (EXA-5364)
    • Fixed an issue where LQL queries containing entity selectors performed in log viewer or other dashboards with logs could fail in the case of big enough monitored environments. Now they will complete successfully with results of a single entity selector limited to 10000 entities. (LOG-2476)
    • Corrected 403 error related to IAM permissions that occurred when creating a calculated service metric via multidimensional analysis. (TI-5097)
    • Fixed broken log query link in events card. (DAVIS-3504)
    • In the problem alerting profile evaluation summary, disabled event title and description filters are now correctly reflected in the evaluation summary. (DAVIS-3438)
    • User action and session properties added via the JavaScript API and declared public in the API call now overrule the doNotTrack mode. (RUM-9168)
    • Fixed issue that prevented users without global "Change monitoring settings" permissions from accessing the "OneAgent updates" settings on individual hosts. (PS-6915)
    • Fixed Webhook notifications so they can now be disabled also when a local webhook URL is not reachable anymore (Managed case only). (DAVIS-3462)
    • Logs list Expand Row column will no longer be displayed when rows cannot be expanded. (LOG-2453)
    • Service detection rules support the override of URL context roots with a constant value for service detection. This enables having all web-based services merged to a single service if they differ only by the URL context root. (TI-5536)
    • UX score percentages are now consistent between buttons and charts. (RUM-9294)
    • Fixed a problem where the RUM enablement setting on process group level was ignored, leading to unintentional enabling or disabling of RUM for certain process groups. (RUM-9579)
    • Problems v2 and Events v2 APIs now use 413 instead of 403 as the HTTP error code if too much data is queried. (DAVIS-3534)
    • Kubernetes list page filter suggestion limit has been increased to 1,000. (TI-5137)
    • Resolved issue that caused anomaly detection settings for device application key user actions to be ignored if the device application's load was dropped completely. (DAVIS-3419)
    • Fixed an issue where, non-breaking space characters at the beginning or end of an LQL query would break the Log Monitoring Classic Log viewer when querying for logs. Now, non-breaking space characters are treated like regular space characters, allowing for completing the query for logs. (LOG-2529)
    • Fixed a rare case where event reports could get lost during server upgrades. (DAVIS-3315)

    Synthetic monitoring

    • Fixed an issue with possibly non-existent and wrong configured public synthetic locations are displayed. (SYNTH-3885)
    • Fixed triggering of synthetic monitors for private locations in on-demand mode. (SYNTH-4452)

    cluster-config

    • Fixed a timing issue that led to monitoring rules for third-party vulnerabilities not being evaluated correctly in some cases. (RSA-8371)

    entity query

    • Fixed an issue where the incorrect technology icon for the Spring service was assigned. (CLUSTER-4497)

    es query

    • Increased a timeout for refreshing TenantStatistics to prevent Elasticsearch queries for larger environments from running into timeouts. (CLUSTER-5136)

    managed

    • Vulnerability: Query parameters for "access forbidden" pages are now validated. (CLD-4697)
    • Improved error handling when changing the license key multiple times in quick succession. (CLD-5048)

    metric query

    • Fixed remainder filter criteria in metric selector not working for some metrics. (CLUSTER-5186)
    • Fixed result containing empty series for counter metrics in some cases. (CLUSTER-4381)

    oda

    • Improved memory impact of user permission check for on-demand analysis. (CLUSTER-5013)

    Update 170 (Build 1.262.170)

    This cumulative update contains 3 resolved issues and all previously released updates for the 1.262 release.

    Component
    Resolved issues
    2
    1

    Cluster

    • Fixed an issue where the "Update Now" button on OneAgent update settings page displayed HTTP 403 error because it required global settings permissions even when done on the host or host_group level. (PS-6957)
    • Fixed an issue where the Managed environments could not start and a server restart was required as a workaround. (DAVIS-4280)

    Synthetic monitoring

    • Corrected behavior of on-demand execution with  the following conditions fulfilled: (1) On demand run, (2) Monitor failing, and (3) Monitor rerun flag set. This fix corrects the conditions for rerun: it should not be performed for on-demand executions. (SYNTH-4458)

    Update 175 (Build 1.262.175)

    This cumulative update contains 1 resolved issue and all previously released updates for the 1.262 release.

    es configuration

    • Increased elasticsearch timeout when querying large amounts of metric dimensions. (CLUSTER-5611)

    Update 187 (Build 1.262.187)

    This cumulative update contains 4 resolved issues (including 1 vulnerability resolution) and all previously released updates for the 1.262 release.

    Component
    Resolved issues
    2 (1 vulnerability)
    2

    Cluster

    • Vulnerability: Resolved an issue in the configuration API in Extension Framework 1.0. (TI-6681)
    • Fixed and issue where metric event duplication breaks alerting for metric events created in earlier configuration version. (DAVIS-4508)

    managed

    • Fixed and issue where the self-monitoring OneAgent hasn't been downloaded during installation and upgrade. (CLD-6658)
    • Fixed an issue where the installation script can't run on OS with enabled FIPS. (CLD-6579)

    Update 191 (Build 1.262.191)

    This is a cumulative update that contains all previously released updates for the 1.262 release.

    Update 205 (Build 1.262.205)

    This cumulative update contains 1 resolved issue and all previously released updates for the 1.262 release.

    managed

    • Introduced a skip path verification option so Dynatrace support can handle corner cases when upgrade process cannot verify directories permissions. (CLD-7069)