Try it free

Configure DNS entries

  • How-to guide
  • 1-min read

To configure DNS entries for the Managed Cluster, follow the steps below.

If you need to configure your own SSL certificate (see Install your own SSL certificate), you also need to create your own domain name for the Managed Cluster domain. Specify your public endpoint and update your local Domain Name System (DNS).

Invalid configuration may lead to a Managed Cluster outage

Invalid configuration of DNS might result in data mismatch or lead to a Managed Cluster outage. No configuration beyond the steps below is needed.

Step 1 Specify your public endpoint

Go to Settings > Public endpoints and enter the address you normally use to access the UI (your own domain name).

Step 2 Add records to your local DNS

  1. For each Cluster node, add a record of its IP address and your domain.

  2. If you rely on mapping of hostnames to IP addresses, create A records in the following format.

    Host Type IP

For example:

dynatrace.mycompany.com A 10.176.0.1, 10.176.0.2, 10.176.0.3

To allow per-node load-balancer routing, add separate subdomains for each node.

For example:

dynatrace.mycompany.com A 10.176.0.1, 10.176.0.2, 10.176.0.3
n01.dynatrace.mycompany.com A 10.176.0.1
n02.dynatrace.mycompany.com A 10.176.0.2
n03.dynatrace.mycompany.com A 10.176.0.3

Step 3 Confirm that the DNS entries resolve

  1. From a machine that uses your DNS, resolve the domain name.

    nslookup <your-domain>

    Replace <your-domain> with the domain name you entered in Public endpoints.

  2. Check that the output lists the IP address of every Cluster node. Then open the address you entered in Public endpoints in a browser. The Managed Cluster sign-in page opens.