Full message
ZDTP001S Persistent Storage allocation failed.
Explanation
The CICS PLT program was unable to allocate a required persistent storage area.
System action
The PLT program terminates and the CICS code module is not enabled.
User response
Determine why the CICS region is unable to provide storage for the DTAX transaction.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP002S Message Block allocation failed.
Explanation
The PLT program was unable to allocate a required Message block storage area.
System action
The PLT program terminates and the CICS code module is disabled.
User response
Determine why the CICS region is unable to provide storage for the PLT program.
Full message
ZDTP003S ZDTSOAPH Load failed. Disabling Dynatrace CICS code module.
Explanation
CICS could not load ZDTSOAPH.
System action
The PLT program terminates and the CICS code module is disabled.
User response
Determine why the CICS region is unable to load one of the DTAX modules - ZDTSOAPH.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP004S ZDTDCCAL final block send failed. rc:<xx>.
Explanation
Message transfer from CICS code module to zDC has failed.
System action
CICS code module operation continues but with missing nodes in the distributed trace.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP005S START DTAX ICE failed.
Explanation
The EXEC CICS START command used to initiate the DTAX ICE transaction in 5 minutes interval has failed.
System action
None
User response
Examine the more detailed message in the appropriate CICS job log to look at the precise EIBRESP code that indicates why this EXEC CICS START command failed.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP006S Inquire MQCONN <QMGR Name> returned with resp:<xx> resp2:<xx>.
Explanation
EXEC CICS INQUIRE for MQ Connection information has failed.
System action
Missing MQ Queue manager name in CICS attachment details.
User response
With the help of resp and resp2 codes, determine why INQUIRE MQCONN failed.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP007S Enable of temporary Language Environment sensor failed no zDC.
Explanation
Indicates that the Language Environment sensor could not be enabled because zDC is unavailable.
System action
Language Environment sensor is not enabled. CICS code module doesn't monitor LE dynamic calls.
User response
Start the zDC for CICS code module to reconnect.
Full message
ZDTP008S GETMAIN PLT Workarea failed.
Explanation
Storage allocation for PLT work area failed.
System action
The PLT program terminates and the CICS code module is disabled.
User response
Determine why the CICS region is unable to provide storage for the PLT program.
Full message
ZDTP009S PLT Name/Token storage not found rc: <xx>.
Explanation
Persistent storage for PLT program is not found.
System action
The PLT program terminates and the CICS code module is disabled.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP010S Turn ON RMI Hook failed with rc: <xx>.
Explanation
RMI hook initialization failed.
System action
CICS code module not initialized successfully.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP011S Turn OFF RMI Hook failed with rc: <xx>.
Explanation
Disabling RMI hook failed.
System action
CICS code module not disabled successfully.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP012S GWA Storage unavailable.
Explanation
Global work area storage for PLT program is unavailable.
System action
Hooks don't initialize successfully.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP013S SOAP hook <nn> failed with rc: <xx>.
Explanation
SOAP hook enable/disable has failed.
System action
Hook operation fails.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP014S Language Environment sensor <nn> failed with rc: <xx>.
Explanation
Language Environment sensor enable/disable has failed.
System action
Hook operation fails.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP015S MRO hook <nn> failed with rc: <xx>.
Explanation
MRO hook enable/disable has failed.
System action
Hook operation fails.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP016S ZDTHKIDR failed with rc: <xx>.
Explanation
Hook operation has failed.
System action
CICS code module don't initialize successfully.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP018S CONF block allocation failed.
Explanation
Storage allocation for config block has failed.
System action
CICS code module doesn't initialize successfully.
User response
Determine why the CICS region is unable to provide storage for the DTAX transaction.
Full message
ZDTP019S Message buffer allocation failed.
Explanation
Storage allocation for message buffer has failed.
System action
CICS code module doesn't initialize successfully.
User response
Determine why the CICS region is unable to provide storage for the DTAX transaction.
Full message
ZDTP020S Get CICS Applid failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS ASSIGN for APPLID retrieval has failed.
System action
CICS Applid is not displayed in DTAX screen and in log messages.
User response
Determine the cause of the problem from resp and resp2 codes.
Full message
ZDTP021S Get STARTCODE failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS ASSIGN for program start code retrieval has failed.
System action
CICS code module doesn't initialize successfully.
User response
Determine the cause of the problem from resp and resp2 codes.
Full message
ZDTP022S CICS DELAY failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS DELAY has failed.
System action
None
User response
Determine the cause of the problem from resp and resp2 codes.
Full message
ZDTP023S Inquire DB2Entry failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS INQUIRE DB2ENTRY has failed.
System action
CICS code module operation continues.
User response
Determine the cause of the problem from resp and resp2 codes.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP024S CICS code module could not locate a valid AgentId. Possibly a misconfigured or disconnected zRemote. Please check the zRemote log.
Explanation
CICS code module didn't get a valid AgentId after initialization.
System action
CICS code module is disabled.
User response
Check for error messages in zRemote log. If the zRemote service is not running, start it.
Full message
ZDTP025S Inquire System failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS INQUIRE SYSTEM for CICS version retrieval has failed.
System action
By default CICS code module for CICS Version 4.2 is loaded.
User response
Determine the cause of the problem from resp and resp2 codes.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP026S Inquire Program failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS INQUIRE PROGRAM has failed.
System action
CICS code module operation continues.
User response
Determine the cause of the problem from resp and resp2 codes.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP027S Disable Exit program failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS DISABLE PROGRAM for all exits has failed.
System action
CICS code module is not disabled successfully.
User response
Determine the cause of the problem from resp and resp2 codes.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP028S Disable RMI Exit failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS DISABLE PROGRAM for RMI exit has failed.
System action
RMI exit is not disabled successfully.
User response
Determine the cause of the problem from resp and resp2 codes.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP029S START Exit failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS ENABLE START for XPCREQC/XRMIIN/XRMIOUT exit has failed.
System action
Exits are not started successfully.
User response
Determine the cause of the problem from resp and resp2 codes.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP030S FREEMAIN failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS FREEMAIN has failed.
System action
Global Work Area for PLT program FREEMAIN fails.
User response
Determine the cause of the problem from resp and resp2 codes.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP031S Enable Exit failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS ENABLE PROGRAM for enabling exits failed.
System action
CICS code module exits are not enabled successfully.
User response
Determine the cause of the problem from resp and resp2 codes.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP032S STOP Exit failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS DISABLE stop for exits failed.
System action
CICS code module exits are not stopped successfully.
User response
Determine the cause of the problem from resp and resp2 codes.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP033S Cancel ReqID failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS CANCEL REQID has failed.
System action
DTAX ICE transaction is not cancelled.
User response
Determine the cause of the problem from resp and resp2 codes.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP034S Inquire ReqID failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS INQUIRE REQID has failed.
System action
DTAX ICE transaction is not started successfully.
User response
Determine the cause of the problem from resp and resp2 codes.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP035S GETMAIN failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS GETMAIN for Global Work Area has failed.
System action
Global Work Area for PLT program is not allocated. CICS code module doesn't initialize successfully.
User response
Determine the cause of the problem from resp and resp2 codes.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP036S START DTAX ICE failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS START has failed.
System action
DTAX Interval control transaction is not started every 5 minutes.
User response
Determine the cause of the problem from resp and resp2 codes.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP037S LOAD Agent failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS LOAD PROGRAM for ZDTAGTxx module has failed.
System action
ZDTAGTxx PTF and build date is not printed in the log messages.
User response
Determine the cause of the problem from resp and resp2 codes.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP038S LOAD ZDTSOAPH failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS LOAD PROGRAM for ZDTSOAPH module has failed.
System action
ZDTSOAPH build date and version information are not printed in the log messages.
User response
Determine the cause of the problem from resp and resp2 codes.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP039S Release agent failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS RELEASE PROGRAM for ZDTAGTxx/ZDTSOAPH module has failed.
System action
CICS code module operation continues.
User response
Determine the cause of the problem from resp and resp2 codes.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP040S CICS Receive failed. resp:<xx>, resp2:<xx>.
Explanation
EXEC CICS RECEIVE DATA has failed.
System action
User command for DTAX transaction is not received and hence is not processed successfully.
User response
Determine the cause of the problem from resp and resp2 codes.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP041S zOS SMFid unavailable.
Explanation
Error retrieving zOS SMFid.
System action
CICS code module doesn't initialize.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP042S ZDTDCCAL INIT message send failed. rc: <xx>.
Explanation
CICS code module initialization has failed.
System action
CICS code module doesn't initialize.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP043S Unknown AUTHTYPE:<xx>.
Explanation
EXEC CICS INQUIRE DB2CONN retreives an AUTHTYPE that is not one of GROUP, TERM, TX, OPID, USERID.
System action
Authtype not specified in DB2 attachment data in distributed trace.
User response
Contact your Db2 administrator.
Full message
ZDTP044S ZDTDCCAL Register Connection pool failed. rc:<xx>.
Explanation
Sending Db2 connection pool information from CICS code module to zDC has failed.
System action
Db2 attachment details in distributed trace is empty.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP045S ZDTDCCAL Register DLI Connection pool failed. rc:<xx>.
Explanation
Sending DL1 connection pool information from CICS code module to zDC has failed.
System action
DLI attachment details in distributed trace is empty.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP046S ZDTDCCAL Message send failed. rc:<xx>.
Explanation
CICS code module could not send message to zDC.
System action
No data passes from CICS to zDC.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP047S DTAX Transaction definition not found. Disabling dynatrace agent.
Explanation
The RDO definition for DTAX transaction is not found.
System action
CICS code module not enabled and the PLT program execution terminates.
User response
Define DTAX transaction for the PLT program. Refer to CICRDO member in SZDTSAMP installation library for sample definition.
Full message
ZDTP048S Config block retrieval failed. rc:<xx>.
Explanation
CICS code module could not find the configuration data with sensor settings.
System action
CICS code module doesn't initialize.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP049S Config block not found.
Explanation
CICS code module could not find the config block with CICS sensor settings.
System action
CICS code module is disabled.
User response
Check if the CICS Transaction Server sensor is placed in the CICS code module Mapping.
Full message
ZDTP050S DTAX Enable failed. rc:<xx>.
Explanation
Couldn't enable CICS code module.
System action
CICS code module doesn't initialize successfully.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP051S ZDTAGT Copyright Info not found.
Explanation
Could not find the Copyright block in ZDTAGTxx module.
System action
CICS code module continues. No PTF/Build date is printed in the zRemote log.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP052S Check Agent Mapping if the CICS Transaction Server sensor is placed.
Explanation
Configuration block with the CICS sensor information is not found.
System action
CICS code module is disabled.
User response
Check if the CICS transaction server sensor is placed in the CICS code module mapping.
Full message
ZDTP053S Disabling CICS code module.
Explanation
This message is an extention of ZDTP052S.
System action
CICS code module is disabled.
User response
Follow ZDTP052S.
Full message
ZDTP054S Turn ON Trace Hooks failed with rc: @@
Explanation
Couldn't enable Trace hook.
System action
Trace hook is not installed.
User response
Look in CICS log for problems. If you don't find anything, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP055S Turn OFF Trace Hooks failed with rc: @@
Explanation
Couldn't disable trace hook.
System action
Trace hook is not installed.
User response
Look in CICS log for problems. If you don't find anything, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP056S DSASTK address is not NULL -logic error
Explanation
Bad address for DSA storage
System action
Dynatrace hooks are not enabled.
User response
CICS getmain failed. Check CICS logs and correct problem.
Full message
ZDTP057S Getmain failed for DSA area
Explanation
Storage allocation for DSA area has failed.
System action
Dynatrace hooks are not enabled.
User response
Check CICS log and correct the problem.
Full message
ZDTP058S DSASTK address is Zero can not free GWA: @@
Explanation
Bad address for DSA storage free
System action
No attempt to free main storage.
User response
This is usually not a problem as Dynatrace code module usually just didn't get any storage for this configuration.
Full message
ZDTP059S Freemain failed for DSA area @@
Explanation
Bad address for DSA storage free from CICS chain.
System action
No attempt to free main storage.
User response
The storage chain is broken or corrupt.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP060S Invalid ICE value, resetting to 5
Explanation
DTAX time value was not in the range from 1 to 5.
System action
The value is reset to 5.
User response
If you are changing ICE values in the DTAX transaction make sure it is value from 1 to 5.
Full message
ZDTP061S This upgrade requires a CICS restart
Explanation
CICS code module has been updated. A CICS restart is required to run the new code.
System action
None
User response
Restart CICS when you can to pick up new code module versions.
Full message
ZDTP062S No CICSplex name, CPSM API error <xx> occurred
Explanation
CICSPlex name not found for the CICS region due to an unexpected error indicated by the error code “xx”
System action
CICS code module continues initialization.
User response
None
Full message
ZDTP063S Turn OFF Language Environment sensor failed with rc: <xx>
Explanation
Couldn't disable Language Environment sensor.
System action
Language Environment sensor is not turned off, CICS code module continues to monitor LE events.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP064S Turn ON Language Environment sensor failed with rc: <xx>
Explanation
Couldn't enable Language Environment sensor.
System action
CICS code module doesn't monitor LE events.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP065S Disable EXITALL failed
Explanation
Couldn't disable the TRUE and GLUE exits after two consecutive attempts.
System action
CICS code module might cause an AKEA abend.
User response
Examine CICS log for DISABLE EXITALL failure.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP066S CICS version <Cics Version> unsupported. Disabling Dynatrace CICS code module.
Explanation
CICS code module has detected an unsupported version of CICS.
System action
CICS code module is disabled.
User response
Upgrade your CICS region to a version supported by Dynatrace.
Full message
ZDTP067S <ZDTAGTxx> Load failed. Disabling Dynatrace CICS code module.
Explanation
Loading of the CICS code module has failed.
System action
CICS code module is disabled.
User response
Examine the CICS job output for any other messages that may be relevant to the failure.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP068S Exec CICS Retrieve failed. resp:<xx>, resp2:<xx>, rcode:<xx>
Explanation
The EXEC CICS RETRIEVE command used to control the Language Environment sensor interval has failed.
System action
None
User response
Examine the more detailed message in the appropriate CICS job log to look at the precise EIBRESP code that indicates why this EXEC CICS RETRIEVE command failed.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP069S START LE ICE failed. resp:<xx>, resp2:<xx>, rcode:<xx>
Explanation
The EXEC CICS START command used to initiate the Language Environment sensor interval has failed.
System action
None
User response
Examine the more detailed message in the appropriate CICS job log to look at the precise EIBRESP code that indicates why this EXEC CICS START command failed.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP070S Agent program ZDTAGTnn not marked ThreadSafe - check CSD definition
Explanation
During CICS startup or DTAX command processing, the Agent program was not marked ThreadSafe. ThreadSafe is required for CICS performance.
System action
Processing is terminated and the CICS region is not setup to run Dynatrace.
User response
Check that the Dynatrace CICS resource definitions has been added to the CICS region. Sample resource definitions can be found in installation sample dataset member(CICRDO).
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP072S Hook installation failed.
Explanation
DTAX transaction could not update the sensor hook settings in the GWA.
System action
If this happens during DTAX initialization, DTAX is disabled. If this happens during the ICE interval, the new sensor changes will not take effect.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP001W Please update PLT, INITPARM, and RDO to ZDTPLT.
Explanation
RDO definition for ZDTPLT with suffix (67/68/69/70/71/72/73) found.
System action
Execution continues.
User response
Update the RDO definitions for ZDTPLTxx and DTAX to refer to ZDTPLT without suffix. Refer to CICRDO member in SZDTSAMP installation library for sample RDO definitions.
Full message
ZDTP002W Extract Exit failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
There was a problem in retrieving the Global Work Area storage for exit program. EXEC CICS EXTRACT EXIT operation failed. This is also possible when an attempt was made to look up DTAX CONF when the CICS code module is disabled.
System action
None
User response
Determine the cause of the problem from resp and resp2 codes.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP004W zDC <zDC Name> unavailable, no active SSCT found.
Explanation
There was no zDC available for CICS code module to connect to.
System action
CICS code module is disabled.
User response
Start zDC and check if the zDC connects successfully to zRA.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP005W Config block retrieval failed. Attempt re-retrieval during ICE.
Explanation
CICS code module could not retrieve CICS Sensor configuration block.
System action
DTAX transaction attempts to retrieve CICS Sensor configuration block in the next 5 minutes interval.
User response
Check if the CICS code module is successfully enabled in the next 5 minutes interval.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP006W DTAX ICE is out of range 1 - 5 minutes. Forcing ICE to 5 minutes.
Explanation
DTAX ICE command was issued with an invalid value.
System action
DTAX transaction sets the ICE value to the default 5 minutes.
User response
If you want to change the default DTAX ICE value, enter a value between 1 to 5.
Full message
ZDTP007W No CICSplex name, CPSM API not available.
Explanation
No CICSplex name is available for the CICS region.
System action
CICS code module continues initialization.
User response
None
Full message
ZDTP008W Too many configuration parameters to display.
Explanation
DTAX CONF option couldn't display all the configuration settings in the DTAX panel, because there's not enough screen area for the display.
System action
Configuration settings are truncated in the DTAX display
User response
None
Full message
ZDTP009W Refer to Deep monitoring section in the UI for all the parameters.
Explanation
Check all CICS code module configuration parameters in Dynatrace UI.
System action
None
User response
To view all the CICS code module configuration settings, go to Settings > Server-side service monitoring > Deep monitoring > CICS, IMS and MQ monitoring.
Full message
ZDTP010W Temporary Language Environment sensor enable failed
Explanation
Couldn't enable Language Environment sensor.
System action
CICS code module doesn't monitor Language Environment events.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP011W Temporary Language Environment sensor disable failed
Explanation
Couldn't disable Language Environment sensor.
System action
CICS code module continues to monitor Language Environment events which might cause overhead.
User response
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP012W CICSPlex name not known due to CPSM security
Explanation
Dynatrace does not have permission to issue EXEC CPSM comands.
System action
CICS code module continues but the plex name is blank or invalid.
User response
Contact system security and authorize Dynatrace to access CPSM.
Full message
ZDTP013W PLT version <plt version> and CICS Agent version <zdtagt version> does not match
Explanation
Dynatrace CICS code module versions are different.
System action
None
User response
Perform CEMT SET NEWCOPY for the version that is older. For example:
If PLT is older
CEMT SET PROG(ZDTPLT) NEWCOPY
If CICS code module version is older (zz is the CTS version)
CEMT SET PROG(ZDTAGTzz) NEWCOPY
Full message
ZDTP014W Invalid time interval entered for Language Environment sensor.
Explanation
Invalid minute value entered for the Language Environment sensor.
System action
None
User response
Enter a valid interval, between 1-1000 minutes, to enable the Language Environment sensor.
Full message
ZDTP015W Language Environment sensor time interval out of range (1-1000).
Explanation
The Language Environment sensor interval value entered is out of range.
System action
None
User response
Enter a valid interval value between 1-1000 minutes to enable the Language Environment sensor.
Full message
ZDTP016W zDC <zdcName> INIT Failed.
Explanation
The PLT program is unable to connect to the collection system.
System action
Execution continues. The PLT program tries to reconnect with the collection system during the next 5 minute window.
User response
Check if the zRemote code module is up and running and connected to Dynatrace. If not, start the service that is down.
If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.
Full message
ZDTP017W Agent ID is zero, using zDC ZDC-NAME
Explanation
During CICS startup or DTAX command processing, the Agent program is not registered to the zDC.
System action
Hooks and exits are not installed.
User response
Make sure the zDC is started and connected to a zRemote.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP001I DTAX User Command: PING.
Explanation
User issued a DTAX PING command.
System action
Check if the connection exists between the z/OS CICS code module and the zRemote code module.
User response
None
Full message
ZDTP002I DTAX User Command: DISABLE.
Explanation
User issued a DTAX DISABLE command.
System action
Disable all the exits used by CICS code module and terminate the 5 minutes DTAX cycle.
User response
None
Full message
ZDTP004I DTAX User Command: CONF.
Explanation
User issued a DTAX CONF command.
System action
Display the active CICS Sensor configuration in the DTAX panel.
User response
None
Full message
ZDTP005I DTAX User Command: ENABLE.
Explanation
User issued a DTAX ENABLE command.
System action
CICS code module registers with the collection system. On successful connection, respective EXITs and Hooks are enabled.
User response
None
Full message
ZDTP006I ZDTPLT[<call type>] Compiled on mm dd yyyy hh:mm:ss.
Explanation
This message is displayed in the zRemote log file when DTAX initializes successfully. The call type indicates the time when DTAX initalizes. Possible call types are, CPLT - DTAX initialized during CICS startup; USER - DTAX initialized due to user command DTAX EN. ICE - DTAX initialized during the ICE interval. This message gives ZDTPLT compilation and version information.
System action
None
User response
None
Full message
ZDTP007I ZDTAGT <PTF> <Build Date> <Build Time> VER <Product Release> <CICS Version>.
Explanation
This message is logged in the zRemote log file when DTAX initializes successfully. This message gives CICS code module module (ZDTAGT) compilation and version information.
System action
None
User response
None
Full message
ZDTP008I ZDTSOAPH <PTF> <Build Date> <Build Time> VER <Product Release>.
Explanation
This message is logged in the zRemote log file when DTAX initializes successfully. This message gives ZDTSOAPH compilation and version information.
System action
None
User response
None
Full message
ZDTP009I INIT failed during PLT. Trying to reconnect…
Explanation
The PLT program is unable to establish connection with the zRemote code module during PLT time.
System action
Reconnect attempted during the next DTAX cycle, which starts immediately after the CICS region comes up.
User response
None
Full message
ZDTP010I Screen size unavailable.
Explanation
There was a problem in retrieving the screen attributes.
System action
Screen attributes are defaulted to Screen Width=80 and Screen Height=24.
User response
None
Full message
ZDTP011I DISABLE TRUE(ZDTAGTxx) with ENTRYNAME(ZDTAGENT).
Explanation
The exit program ZDTAGTxx associated with entryname ZDTAGENT is disabled. xx represents the CTS version.
System action
None
User response
None
Full message
ZDTP012I ENABLE TRUE(ZDTAGTxx) with ENTRYNAME(ZDTAGENT).
Explanation
The exit program ZDTAGTxx associated with entryname ZDTAGENT is enabled. xx represents the CTS version.
System action
None
User response
None
Full message
ZDTP013I ENABLE Exit program(ZDTAGTxx) with Exit([exit name]).
Explanation
Enable the global exit point specified by [exit name] associated with the ZDTAGTxx exit.
System action
None
User response
None
Full message
ZDTP014I START TRUE(ZDTAGTxx) with ENTRYNAME(ZDTAGENT).
Explanation
Start the user exit ZDTAGENT associated with the exit program ZDTAGTxx.
System action
None
User response
None
Full message
ZDTP015I START Exit program(ZDTAGTxx) with Exit([exit name]).
Explanation
Start the global exit point specified by [exit name] associated with the exit program ZDTAGTxx.
System action
None
User response
None
Full message
ZDTP016I STOP Exit program(program name) and all associated exits
Explanation
Stop and disable all the exit points associated with the exit ZDTAGTxx.
System action
None
User response
None
Full message
ZDTP017I DISABLE Exit program(ZDTAGTxx) with Exit([exit name]).
Explanation
Disable the global exit point [exit name] associated with the exit ZDTAGTxx.
System action
None
User response
None
Full message
ZDTP019I Config block retrieved successfully.
Explanation
Indicates that CICS sensor configuration has been retrieved successfully after there was a problem in configuration block access. This message follows after ZDTP049S when the CICS transaction server sensor has been placed.
System action
CICS code module is initialized.
User response
None
Full message
ZDTP020I Active Sensors: <TX | MQ | DB2 | DB2R | SOAP | CTG | DB2Fetch | DLI | DLIR | LE | File | HTTP | ZCON | TTX | CTGA>.
Explanation
Indicates the CICS Sensors that are placed and active.
System action
None
User response
None
Full message
ZDTP021I CICS Sensors updated.
Explanation
Indicates that the CICS Sensors have been updated and the CICS code module honored the changes during DTAX 5 minutes cycle.
System action
None
User response
None
Full message
ZDTP022I Inquire DB2Conn failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation
EXEC CICS INQUIRE DB2CONN has failed.
System action
CICS code module operation continues. No DB2 attachment details provided in the distributed trace.
User response
Determine the cause of the problem from resp and resp2 codes.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP023I DTAX ICE interval set to: @@ minute(s).
Explanation
DTAX ICE value was changed.
System action
None.
User response
None
Full message
ZDTP024I Trace Hook is being enabled
Explanation
Indicates that the Trace hook is being turned on in the CICS code module.
System action
None.
User response
None
Full message
ZDTP025I Trace Hook is being disabled
Explanation
Indicates that the Trace hook is being turned off in the CICS code module.
System action
None.
User response
None
Full message
ZDTP026I Temporary Language Environment sensor is enabled for @@@@ minute(s).
Explanation
Indicates that the Language Environment sensor has been turned on for the current DTAX ICE interval. Note that the Language Environment sensor will be automatically turned off during the following DTAX ICE cycle.
System action
None.
User response
None
Full message
ZDTP027I Turn off Language Environment sensor because ICE timer expired
Explanation
Indicates that the Language Environment sensor has been automatically turned off at the end of the current ICE interval.
System action
None.
User response
None
Full message
ZDTP028I TX code : xxxx xxxx xxxx .
Explanation
Displays the Start TX sensor setting in Deep Monitoring in the web UI for the CICS regions.
System action
None.
User response
None
Full message
ZDTP029I DTAX User Command: LEENAB
Explanation
User issued a DTAX LEENAB command to turn on the Language Environment sensor.
System action
Language Environment sensor is turned on temporarily. CICS code module starts monitoring LE dynamic calls.
User response
None
Full message
ZDTP030I DTAX Status:V.R PLT-PTF AGT-PTF TRUE-STS XP RMI-STS ZDC-NAME AGT-ID ).
Explanation
DTAX STATUS console command was issued. This can be used for Automated Operations to see if Dynatrace Hooks/Exits are enabled. Field descriptions:
V.R: DT VersionPLT-PTF: PLT PTFAGT-PTF: Agent PTFTRUE-STS: TRUE StatusXPC-STS: XPCREQ/C StatusRMI-STS: RMIIN/RZDC-NAME: zDC NameAGT-ID: Agent IDSystem action
None, this is informational only.
User response
None
Full message
ZDTP031I DSA Freed at location : <addr>
Explanation
Indicates that the DSA at location addr, used by CICS code module, has been freed.
System action
DSA memory is freed.
User response
None
Full message
ZDTP032I DTAX Modify Command: LOG accepted.
Explanation
DTAX received the LOG level update from MODIFY command.
System action
None.
User response
None.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP033I DTAX using TD Queue ZDTQ DD for messages.
Explanation
DTAX is now using ZDTQ DD for messages instead of the default MSGUSR.
System action
None.
User response
None.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP034I Terminal TX code : xxxx
Explanation
This message is displayed with user specified Terminal transaction code, in the zRemote log during DTAX initialization.
System action
CICS code module stops monitoring MRO events if the MRO hook has been removed successfully.
User response
If the Return code is a non-zero value, MRO hook removal has failed.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP035I Language Environment sensor has been disabled successfully.
Explanation
The Language Environment sensor has been disabled. The CICS agent will stop monitoring LE programs.
System action
None.
User response
None.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP036I Language Environment is already disabled.
Explanation
Language Environment sensor is already disabled, no action taken.
System action
None
User response
None.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP131I Install of Soap Hook Completed Return Code: xxxx
Explanation
CICS code module has completed installing SOAP hook for SOAP request monitoring. Return code 0 indicates successful SOAP hook installation.
System action
CICS code module is ready to monitor SOAP events with successful SOAP hook installation.
User response
If the Return code is a non-zero value, SOAP hook installation has failed.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP132I Removal of SOAP Hook Completed Return Code: xxxx
Explanation
CICS code module has completed removing SOAP hook. Return code 0 indicates successful SOAP hook removal.
System action
CICS code module stops monitoring SOAP events if the SOAP hook has been removed successfully.
User response
If the Return code is a non-zero value, SOAP hook removal has failed.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP133I Install of MRO Hook Completed Return Code: xxxx
Explanation
CICS code module has completed installing MRO hook for multi region call monitoring. Return code 0 indicates successful MRO hook installation.
System action
CICS code module is ready to monitor MRO events with the successful MRO hook installation.
User response
If the Return code is a non-zero value, MRO hook installation has failed.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP134I Removal of MRO Hook Completed Return Code: xxxx
Explanation
CICS code module has completed removing MRO hook. Return code 0 indicates successful MRO hook removal.
System action
CICS code module stops monitoring MRO events if the MRO hook has been removed successfully.
User response
If the Return code is a non-zero value, MRO hook removal has failed.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP135I Install of ERM Hook Completed Return Code: xxxx
Explanation
CICS code module has completed installing ERM hook for DB2 call monitoring. Return code 0 indicates successful ERM hook installation.
System action
CICS code module is ready to monitor DB2 calls from the CICS region with the successful ERM hook installation.
User response
If the Return code is a non-zero value, ERM hook installation has failed.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP136I Removal of ERM Hook Completed Return Code: xxxx
Explanation
CICS code module has completed removing ERM hook. Return code 0 indicates successful ERM hook removal.
System action
CICS code module stops monitoring DB2 calls if the ERM hook has been removed successfully.
User response
If the Return code is a non-zero value, ERM hook removal has failed.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP137I Install of PL1 Hook Completed Return Code: xxxx
Explanation
CICS code module has completed installing PL1 hook for monitoring PL1 dynamic calls. Return code 0 indicates successful PL1 hook installation.
System action
CICS code module is ready to monitor PL1 dynamic calls with the successful PL1 hook installation.
User response
If the Return code is a non-zero value, PL1 hook installation has failed.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP138I Removal of PL1 Hook Completed Return Code: xxxx
Explanation
CICS code module has completed removing PL1 hook. Return code 0 indicates successful PL1 hook removal.
System action
CICS code module stops monitoring PL1 dynamic calls if the PL1 hook has been removed successfully.
User response
If the Return code is a non-zero value, PL1 hook removal has failed.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP139I Install of <COBOL routine> Hook Completed Return Code: xxxx
Explanation
CICS code module has completed installing COBOL hooks IGZCFCC, IGZCLNK and IGZXFCAL (indicated by “COBOL routine”) for monitoring COBOL dynamic calls. Return code 0 indicates successful COBOL hooks installation.
System action
CICS code module is ready to monitor COBOL dynamic calls with the successful COBOL hooks installation.
User response
If the Return code is a non-zero value, COBOL hook installation has failed.
Please contact a Dynatrace product expert via live chat within your environment.
Full message
ZDTP140I Removal of COBOL Hook Completed Return Code: xxxx
Explanation
CICS code module has completed removing COBOL hook. Return code 0 indicates successful COBOL hook removal.
System action
CICS code module stops monitoring COBOL dynamic calls if the COBOL hook has been removed successfully.
User response
If the Return code is a non-zero value, COBOL hook removal has failed.
Please contact a Dynatrace product expert via live chat within your environment.