z/OS module messages - DTAX messages

ZDTP001S

Full message	ZDTP001S Persistent Storage allocation failed.
Explanation	The CICS PLT program was unable to allocate a required persistent storage area.
System action	The PLT program terminates and the CICS code module is not enabled.
User response	Determine why the CICS region is unable to provide storage for the DTAX transaction. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP002S

Full message	ZDTP002S Message Block allocation failed.
Explanation	The PLT program was unable to allocate a required Message block storage area.
System action	The PLT program terminates and the CICS code module is disabled.
User response	Determine why the CICS region is unable to provide storage for the PLT program.

ZDTP003S

Full message	ZDTP003S ZDTSOAPH Load failed.
Explanation	CICS could not load `ZDTSOAPH`.
System action	The PLT program terminates and the CICS code module is disabled.
User response	Determine why the CICS region is unable to provide storage for the DTAX transaction. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP004S

Full message	ZDTP004S ZDTDCCAL final block send failed. rc:<xx>.
Explanation	Message transfer from CICS code module to zDC has failed.
System action	CICS code module operation continues but with missing nodes in the distributed trace.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP005S

Full message	ZDTP005S START DTAX ICE failed.
Explanation	The `EXEC CICS START` command used to initiate the `DTAX ICE` transaction in 5 minutes interval has failed.
System action	None
User response	Examine the more detailed message in the appropriate CICS job log to look at the precise EIBRESP code that indicates why this EXEC CICS START command failed. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP006S

Full message	ZDTP006S Inquire MQCONN <QMGR Name> returned with resp:<xx> resp2:<xx>.
Explanation	`EXEC CICS INQUIRE` for MQ Connection information has failed.
System action	Missing MQ Queue manager name in CICS attachment details.
User response	With the help of `resp` and `resp2` codes, determine why INQUIRE MQCONN failed. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP007S

Full message	ZDTP007S Enable of temporary Language Environment sensor failed no zDC.
Explanation	Indicates that the Language Environment sensor could not be enabled because zDC is unavailable.
System action	Language Environment sensor is not enabled. CICS code module doesn't monitor LE dynamic calls.
User response	Start the zDC for CICS code module to reconnect.

ZDTP008S

Full message	ZDTP008S GETMAIN PLT Workarea failed.
Explanation	Storage allocation for PLT work area failed.
System action	The PLT program terminates and the CICS code module is disabled.
User response	Determine why the CICS region is unable to provide storage for the PLT program.

ZDTP009S

Full message	ZDTP009S PLT Name/Token storage not found rc: <xx>.
Explanation	Persistent storage for PLT program is not found.
System action	The PLT program terminates and the CICS code module is disabled.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP010S

Full message	ZDTP010S Turn ON RMI Hook failed with rc: <xx>.
Explanation	RMI hook initialization failed.
System action	CICS code module not initialized successfully.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP011S

Full message	ZDTP011S Turn OFF RMI Hook failed with rc: <xx>.
Explanation	Disabling RMI hook failed.
System action	CICS code module not disabled successfully.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP012S

Full message	ZDTP012S GWA Storage unavailable.
Explanation	Global work area storage for PLT program is unavailable.
System action	Hooks don't initialize successfully.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP013S

Full message	ZDTP013S SOAP hook <nn> failed with rc: <xx>.
Explanation	SOAP hook enable/disable has failed.
System action	Hook operation fails.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP014S

Full message	ZDTP014S Language Environment sensor <nn> failed with rc: <xx>.
Explanation	Language Environment sensor enable/disable has failed.
System action	Hook operation fails.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP015S

Full message	ZDTP015S MRO hook <nn> failed with rc: <xx>.
Explanation	MRO hook enable/disable has failed.
System action	Hook operation fails.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP016S

Full message	ZDTP016S ZDTHKIDR failed with rc: <xx>.
Explanation	Hook operation has failed.
System action	CICS code module don't initialize successfully.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP017S

Full message	ZDTP017S zDC <zdcName> INIT Failed.
Explanation	The PLT program is unable to connect to the collection system.
System action	Execution continues. The PLT program tries to re-connect with the collection system during the next 5 minutes window.
User response	Check if the zRemote code module is up and running and connected to Dynatrace. If not, start the service that is down. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP018S

Full message	ZDTP018S CONF block allocation failed.
Explanation	Storage allocation for config block has failed.
System action	CICS code module doesn't initialize successfully.
User response	Determine why the CICS region is unable to provide storage for the DTAX transaction.

ZDTP019S

Full message	ZDTP019S Message buffer allocation failed.
Explanation	Storage allocation for message buffer has failed.
System action	CICS code module doesn't initialize successfully.
User response	Determine why the CICS region is unable to provide storage for the DTAX transaction.

ZDTP020S

Full message	ZDTP020S Get CICS Applid failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS ASSIGN` for APPLID retrieval has failed.
System action	CICS Applid is not displayed in DTAX screen and in log messages.
User response	Determine the cause of the problem from `resp` and `resp2` codes.

ZDTP021S

Full message	ZDTP021S Get STARTCODE failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS ASSIGN` for program start code retrieval has failed.
System action	CICS code module doesn't initialize successfully.
User response	Determine the cause of the problem from `resp` and `resp2` codes.

ZDTP022S

Full message	ZDTP022S CICS DELAY failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS DELAY` has failed.
System action	None
User response	Determine the cause of the problem from `resp` and `resp2` codes.

ZDTP023S

Full message	ZDTP023S Inquire DB2Entry failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS INQUIRE DB2ENTRY` has failed.
System action	CICS code module operation continues.
User response	Determine the cause of the problem from `resp` and `resp2` codes. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP024S

Full message	ZDTP024S CICS code module could not locate a valid AgentId. Possibly a misconfigured or disconnected zRemote. Please check the zRemote log.
Explanation	CICS code module didn't get a valid AgentId after initialization.
System action	CICS code module is disabled.
User response	Check for error messages in zRemote log. If the zRemote service is not running, start it.

ZDTP025S

Full message	ZDTP025S Inquire System failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS INQUIRE SYSTEM` for CICS version retrieval has failed.
System action	By default CICS code module for CICS Version 4.2 is loaded.
User response	Determine the cause of the problem from `resp` and `resp2` codes. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP026S

Full message	ZDTP026S Inquire Program failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS INQUIRE PROGRAM` has failed.
System action	CICS code module operation continues.
User response	Determine the cause of the problem from `resp` and `resp2` codes. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP027S

Full message	ZDTP027S Disable Exit program failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS DISABLE PROGRAM` for all exits has failed.
System action	CICS code module is not disabled successfully.
User response	Determine the cause of the problem from `resp` and `resp2` codes. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP028S

Full message	ZDTP028S Disable RMI Exit failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS DISABLE PROGRAM` for RMI exit has failed.
System action	RMI exit is not disabled successfully.
User response	Determine the cause of the problem from `resp` and `resp2` codes. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP029S

Full message	ZDTP029S START Exit failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS ENABLE START` for `XPCREQC/XRMIIN/XRMIOUT` exit has failed.
System action	Exits are not started successfully.
User response	Determine the cause of the problem from `resp` and `resp2` codes. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP030S

Full message	ZDTP030S FREEMAIN failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS FREEMAIN` has failed.
System action	Global Work Area for PLT program FREEMAIN fails.
User response	Determine the cause of the problem from `resp` and `resp2` codes. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP031S

Full message	ZDTP031S Enable Exit failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS ENABLE PROGRAM` for enabling exits failed.
System action	CICS code module exits are not enabled successfully.
User response	Determine the cause of the problem from `resp` and `resp2` codes. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP032S

Full message	ZDTP032S STOP Exit failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS DISABLE` stop for exits failed.
System action	CICS code module exits are not stopped successfully.
User response	Determine the cause of the problem from `resp` and `resp2` codes. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP033S

Full message	ZDTP033S Cancel ReqID failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS CANCEL REQID` has failed.
System action	`DTAX ICE` transaction is not cancelled.
User response	Determine the cause of the problem from `resp` and `resp2` codes. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP034S

Full message	ZDTP034S Inquire ReqID failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS INQUIRE REQID` has failed.
System action	`DTAX ICE` transaction is not started successfully.
User response	Determine the cause of the problem from `resp` and `resp2` codes. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP035S

Full message	ZDTP035S GETMAIN failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS GETMAIN` for Global Work Area has failed.
System action	Global Work Area for PLT program is not allocated. CICS code module doesn't initialize successfully.
User response	Determine the cause of the problem from `resp` and `resp2` codes. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP036S

Full message	ZDTP036S START DTAX ICE failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS START` has failed.
System action	DTAX Interval control transaction is not started every 5 minutes.
User response	Determine the cause of the problem from `resp` and `resp2` codes. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP037S

Full message	ZDTP037S LOAD Agent failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS LOAD PROGRAM` for `ZDTAGTxx` module has failed.
System action	`ZDTAGTxx` PTF and build date is not printed in the log messages.
User response	Determine the cause of the problem from `resp` and `resp2` codes. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP038S

Full message	ZDTP038S LOAD ZDTSOAPH failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS LOAD PROGRAM` for `ZDTSOAPH` module has failed.
System action	`ZDTSOAPH` build date and version information are not printed in the log messages.
User response	Determine the cause of the problem from `resp` and `resp2` codes. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP039S

Full message	ZDTP039S Release code module failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	`EXEC CICS RELEASE PROGRAM` for `ZDTAGTxx/ZDTSOAPH` module has failed.
System action	CICS code module operation continues.
User response	Determine the cause of the problem from `resp` and `resp2` codes. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP040S

Full message	ZDTP040S CICS Receive failed. resp:<xx>, resp2:<xx>.
Explanation	`EXEC CICS RECEIVE DATA` has failed.
System action	User command for `DTAX` transaction is not received and hence is not processed successfully.
User response	Determine the cause of the problem from `resp` and `resp2` codes. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP041S

Full message	ZDTP041S zOS SMFid unavailable.
Explanation	Error retrieving zOS SMFid.
System action	CICS code module doesn't initialize.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP042S

Full message	ZDTP042S ZDTDCCAL INIT message send failed. rc: <xx>.
Explanation	CICS code module initialization has failed.
System action	CICS code module doesn't initialize.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP043S

Full message	ZDTP043S Unknown AUTHTYPE:<xx>.
Explanation	`EXEC CICS INQUIRE DB2CONN` retreives an `AUTHTYPE` that is not one of `GROUP, TERM, TX, OPID, USERID`.
System action	Authtype not specified in DB2 attachment data in distributed trace.
User response	Contact your Db2 administrator.

ZDTP044S

Full message	ZDTP044S ZDTDCCAL Register Connection pool failed. rc:<xx>.
Explanation	Sending Db2 connection pool information from CICS code module to zDC has failed.
System action	Db2 attachment details in distributed trace is empty.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP045S

Full message	ZDTP045S ZDTDCCAL Register DLI Connection pool failed. rc:<xx>.
Explanation	Sending DL1 connection pool information from CICS code module to zDC has failed.
System action	DLI attachment details in distributed trace is empty.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP046S

Full message	ZDTP046S ZDTDCCAL Message send failed. rc:<xx>.
Explanation	CICS code module could not send message to zDC.
System action	No data passes from CICS to zDC.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP047S

Full message	ZDTP047S DTAX Transaction definition not found. Disabling dynatrace agent.
Explanation	The RDO definition for DTAX transaction is not found.
System action	CICS code module not enabled and the PLT program execution terminates.
User response	Define DTAX transaction for the PLT program. Refer to CICRDO member in SZDTSAMP installation library for sample definition.

ZDTP048S

Full message	ZDTP048S Config block retrieval failed. rc:<xx>.
Explanation	CICS code module could not find the configuration data with sensor settings.
System action	CICS code module doesn't initialize.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP049S

Full message	ZDTP049S Config block not found.
Explanation	CICS code module could not find the config block with CICS sensor settings.
System action	CICS code module is disabled.
User response	Check if the CICS Transaction Server sensor is placed in the CICS code module Mapping.

ZDTP050S

Full message	ZDTP050S DTAX Enable failed. rc:<xx>.
Explanation	Couldn't enable CICS code module.
System action	CICS code module doesn't initialize successfully.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP051S

Full message	ZDTP051S ZDTAGT Copyright Info not found.
Explanation	Could not find the Copyright block in ZDTAGTxx module.
System action	CICS code module continues. No PTF/Build date is printed in the zRemote log.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP052S

Full message	ZDTP052S Check code module Mapping if the CICS Transaction Server sensor is placed.
Explanation	Configuration block with the CICS sensor information is not found.
System action	CICS code module is disabled.
User response	Check if the CICS transaction server sensor is placed in the CICS code module mapping.

ZDTP053S

Full message	ZDTP053S Disabling CICS code module.
Explanation	This message is an extention of `ZDTP052S`.
System action	CICS code module is disabled.
User response	Follow `ZDTP052S`.

ZDTP054S

Full message	ZDTP054S Turn ON Trace Hooks failed with rc: @@
Explanation	Couldn't enable Trace hook.
System action	Trace hook is not installed.
User response	Look in CICS log for problems. If you don't find anything, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP055S

Full message	ZDTP055S Turn OFF Trace Hooks failed with rc: @@
Explanation	Couldn't disable trace hook.
System action	Trace hook is not installed.
User response	Look in CICS log for problems. If you don't find anything, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP056S

Full message	ZDTP056S DSASTK address is not NULL -logic error
Explanation	Bad address for DSA storage
System action	Dynatrace hooks are not enabled.
User response	CICS getmain failed. Check CICS logs and correct problem.

ZDTP057S

Full message	ZDTP057S Getmain failed for DSA area
Explanation	Storage allocation for DSA area has failed.
System action	Dynatrace hooks are not enabled.
User response	Check CICS log and correct the problem.

ZDTP058S

Full message	ZDTP058S DSASTK address is Zero can not free GWA: @@
Explanation	Bad address for DSA storage free
System action	No attempt to free main storage.
User response	This is usually not a problem as Dynatrace code module usually just didn't get any storage for this configuration.

ZDTP059S

Full message	ZDTP059S Freemain failed for DSA area @@
Explanation	Bad address for DSA storage free from CICS chain.
System action	No attempt to free main storage.
User response	The storage chain is broken or corrupt. If the problem persists, please contact a Dynatrace product expert via live chat within your Dynatrace environment.

ZDTP060S

Full message	ZDTP060S Invalid ICE value, resetting to 5
Explanation	DTAX time value was not in the range from 1 to 5.
System action	The value is reset to 5.
User response	If you are changing ICE values in the DTAX transaction make sure it is value from 1 to 5.

ZDTP061S

Full message	ZDTP061S This upgrade requires a CICS restart
Explanation	CICS code module has been updated. A CICS restart is required to run the new code.
System action	None
User response	Restart CICS when you can to pick up new code module versions.

ZDTP062S

Full message	ZDTP062S No CICSplex name, CPSM API error <xx> occurred
Explanation	CICSPlex name not found for the CICS region due to an unexpected error indicated by the error code “xx”
System action	CICS code module continues initialization.
User response	None

ZDTP063S

Full message	ZDTP063S Turn OFF Language Environment sensor failed with rc: <xx>
Explanation	Couldn't disable Language Environment sensor.
System action	Language Environment sensor is not turned off, CICS code module continues to monitor LE events.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP064S

Full message	ZDTP064S Turn ON Language Environment sensor failed with rc: <xx>
Explanation	Couldn't enable Language Environment sensor.
System action	CICS code module doesn't monitor LE events.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP065S

Full message	ZDTP065S Disable EXITALL failed
Explanation	Couldn't disable the TRUE and GLUE exits after two consecutive attempts.
System action	CICS code module might cause an `AKEA` abend.
User response	Examine CICS log for `DISABLE EXITALL` failure. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP066S

Full message	ZDTP066S CICS version <Cics Version> unsupported. Disabling Dynatrace CICS code module.
Explanation	CICS code module has detected an unsupported version of CICS.
System action	CICS code module is disabled.
User response	Upgrade your CICS region to a version supported by Dynatrace.

ZDTP067S

Full message	ZDTP067S <ZDTAGTxx> Load failed. Disabling Dynatrace CICS code module.
Explanation	Loading of the CICS code module has failed.
System action	CICS code module is disabled.
User response	Examine the CICS job output for any other messages that may be relevant to the failure. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP068S

Full message	ZDTP068S Exec CICS Retrieve failed. resp:<xx>, resp2:<xx>, rcode:<xx>
Explanation	The `EXEC CICS RETRIEVE` command used to control the Language Environment sensor interval has failed.
System action	None
User response	Examine the more detailed message in the appropriate CICS job log to look at the precise EIBRESP code that indicates why this EXEC CICS RETRIEVE command failed. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP069S

Full message	ZDTP069S START LE ICE failed. resp:<xx>, resp2:<xx>, rcode:<xx>
Explanation	The `EXEC CICS START` command used to initiate the Language Environment sensor interval has failed.
System action	None
User response	Examine the more detailed message in the appropriate CICS job log to look at the precise EIBRESP code that indicates why this EXEC CICS START command failed. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP070S

Full message	ZDTP070S Agent program ZDTAGTnn not marked ThreadSafe - check CSD definition
Explanation	During CICS startup or DTAX command processing, the Agent program was not marked ThreadSafe. ThreadSafe is required for CICS performance.
System action	Processing is terminated and the CICS region is not setup to run Dynatrace.
User response	Check that the Dynatrace CICS resource definitions has been added to the CICS region. Sample resource definitions can be found in installation sample dataset member(CICRDO). Please contact a Dynatrace product expert via live chat within your environment.

ZDTP071S

Full message	ZDTP071S Agent ID is zero, using zDC ZDC-NAME
Explanation	During CICS startup or DTAX command processing, the Agent program is not registered to the zDC.
System action	Hooks and exits are not installed.
User response	Make sure the zDC is started and connected to a zRemote. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP001W

Full message	ZDTP001W Please update PLT, INITPARM, and RDO to ZDTPLT.
Explanation	RDO definition for `ZDTPLT` with suffix (67/68/69/70/71/72/73) found.
System action	Execution continues.
User response	Update the RDO definitions for `ZDTPLTxx` and DTAX to refer to `ZDTPLT` without suffix. Refer to CICRDO member in `SZDTSAMP` installation library for sample RDO definitions.

ZDTP002W

Full message	ZDTP002W Extract Exit failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	There was a problem in retrieving the Global Work Area storage for exit program. `EXEC CICS EXTRACT EXIT` operation failed. This is also possible when an attempt was made to look up `DTAX CONF` when the CICS code module is disabled.
System action	None
User response	Determine the cause of the problem from `resp` and `resp2` codes. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP003W

Full message	ZDTP003W zDC <name> and GWA unavailable.
Explanation	Exits are enabled but there was a problem in retrieving the Global work area because there was no zDC available.
System action	None
User response	Check if the zDC is up and connected to zRA. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP004W

Full message	ZDTP004W zDC <zDC Name> unavailable.
Explanation	There was no zDC available for CICS code module to connect to.
System action	CICS code module is disabled.
User response	Start zDC and check if the zDC connects successfully to zRA. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP005W

Full message	ZDTP005W Config block retrieval failed. Attempt re-retrieval during ICE.
Explanation	CICS code module could not retrieve CICS Sensor configuration block.
System action	DTAX transaction attempts to retrieve CICS Sensor configuration block in the next 5 minutes interval.
User response	Check if the CICS code module is successfully enabled in the next 5 minutes interval. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP006W

Full message	ZDTP006W DTAX ICE is out of range 1 - 5 minutes. Forcing ICE to 5 minutes.
Explanation	`DTAX ICE` command was issued with an invalid value.
System action	DTAX transaction sets the ICE value to the default 5 minutes.
User response	If you want to change the default DTAX ICE value, enter a value between 1 to 5.

ZDTP007W

Full message	ZDTP007W No CICSplex name, CPSM API not available.
Explanation	No CICSplex name is available for the CICS region.
System action	CICS code module continues initialization.
User response	None

ZDTP008W

Full message	ZDTP008W Too many configuration parameters to display.
Explanation	`DTAX CONF` option couldn't display all the configuration settings in the DTAX panel, because there's not enough screen area for the display.
System action	Configuration settings are truncated in the DTAX display
User response	None

ZDTP009W

Full message	ZDTP009W Refer to Deep monitoring section in the UI for all the parameters.
Explanation	Check all CICS code module configuration parameters in Dynatrace UI.
System action	None
User response	To view all the CICS code module configuration settings, go to Settings > Server-side service monitoring > Deep monitoring > CICS, IMS and MQ monitoring.

ZDTP010W

Full message	ZDTP010W Temporary Language Environment sensor enable failed
Explanation	Couldn't enable Language Environment sensor.
System action	CICS code module doesn't monitor Language Environment events.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP011W

Full message	ZDTP011W Temporary Language Environment sensor disable failed
Explanation	Couldn't disable Language Environment sensor.
System action	CICS code module continues to monitor Language Environment events which might cause overhead.
User response	Please contact a Dynatrace product expert via live chat within your environment.

ZDTP012W

Full message	ZDTP012W CICSPlex name not known due to CPSM security
Explanation	Dynatrace does not have permission to issue EXEC CPSM comands.
System action	CICS code module continues but the plex name is blank or invalid.
User response	Contact system security and authorize Dynatrace to access CPSM.

ZDTP013W

Full message	ZDTP013W PLT version <plt version> and CICS Agent version <zdtagt version> does not match
Explanation	Dynatrace CICS code module versions are different.
System action	None
User response	Perform `CEMT SET NEWCOPY` for the version that is older. For example: If PLT is older CEMT SET PROG(ZDTPLT) NEWCOPY If CICS code module version is older (`zz` is the CTS version) CEMT SET PROG(ZDTAGTzz) NEWCOPY

ZDTP014W

Full message	ZDTP014W Invalid time interval entered for Language Environment sensor.
Explanation	Invalid minute value entered for the Language Environment sensor.
System action	None
User response	Enter a valid interval, between 1-1000 minutes, to enable the Language Environment sensor.

ZDTP015W

Full message	ZDTP015W Language Environment sensor time interval out of range (1-1000).
Explanation	The Language Environment sensor interval value entered is out of range.
System action	None
User response	Enter a valid interval value between 1-1000 minutes to enable the Language Environment sensor.

ZDTP001I

Full message	ZDTP001I DTAX User Command: PING.
Explanation	User issued a `DTAX PING` command.
System action	Check if the connection exists between the z/OS CICS code module and the zRemote code module.
User response	None

ZDTP002I

Full message	ZDTP002I DTAX User Command: DISABLE.
Explanation	User issued a `DTAX DISABLE` command.
System action	Disable all the exits used by CICS code module and terminate the 5 minutes DTAX cycle.
User response	None

ZDTP004I

Full message	ZDTP004I DTAX User Command: CONF.
Explanation	User issued a `DTAX CONF` command.
System action	Display the active CICS Sensor configuration in the DTAX panel.
User response	None

ZDTP005I

Full message	ZDTP005I DTAX User Command: ENABLE.
Explanation	User issued a `DTAX ENABLE` command.
System action	CICS code module registers with the collection system. On successful connection, respective EXITs and Hooks are enabled.
User response	None

ZDTP006I

Full message	ZDTP006I ZDTPLT[CPLT] Compiled on mm dd yyyy hh:mm:ss.
Explanation	This message is displayed in zRemote log file when the CICS code module connects during CICS startup. This message gives ZDTPLT compilation and version information.
System action	None
User response	None

ZDTP007I

Full message	ZDTP007I ZDTAGT <PTF> <Build Date> <Build Time> VER <Product Release> <CICS Version>.
Explanation	This message is logged in zRemote log file when the CICS code module connects during CICS startup. This message gives CICS code module module (ZDTAGT) compilation and version information.
System action	None
User response	None

ZDTP008I

Full message	ZDTP008I ZDTSOAPH <PTF> <Build Date> <Build Time> VER <Product Release>.
Explanation	This message is logged in zRemote log file when the CICS code module connects during CICS startup. This message gives ZDTSOAPH compilation and version information.
System action	None
User response	None

ZDTP009I

Full message	ZDTP009I INIT failed during PLT. Trying to reconnect…
Explanation	The PLT program is unable to establish connection with the zRemote code module during PLT time.
System action	Reconnect attempted during the next DTAX cycle, which starts immediately after the CICS region comes up.
User response	None

ZDTP010I

Full message	ZDTP010I Screen size unavailable.
Explanation	There was a problem in retrieving the screen attributes.
System action	Screen attributes are defaulted to `Screen Width=80` and `Screen Height=24`.
User response	None

ZDTP011I

Full message	ZDTP011I DISABLE TRUE(ZDTAGTxx) with ENTRYNAME(ZDTAGENT).
Explanation	The exit program `ZDTAGTxx` associated with entryname `ZDTAGENT` is disabled. `xx` represents the CTS version.
System action	None
User response	None

ZDTP012I

Full message	ZDTP012I ENABLE TRUE(ZDTAGTxx) with ENTRYNAME(ZDTAGENT).
Explanation	The exit program ZDTAGTxx associated with entryname ZDTAGENT is enabled. `xx` represents the CTS version.
System action	None
User response	None

ZDTP013I

Full message	ZDTP013I ENABLE Exit program(ZDTAGTxx) with Exit([exit name]).
Explanation	Enable the global exit point specified by `[exit name]` associated with the ZDTAGTxx exit.
System action	None
User response	None

ZDTP014I

Full message	ZDTP014I START TRUE(ZDTAGTxx) with ENTRYNAME(ZDTAGENT).
Explanation	Start the user exit `ZDTAGENT` associated with the exit program `ZDTAGTxx`.
System action	None
User response	None

ZDTP015I

Full message	ZDTP015I START Exit program(ZDTAGTxx) with Exit([exit name]).
Explanation	Start the global exit point specified by `[exit name]` associated with the exit program `ZDTAGTxx`.
System action	None
User response	None

ZDTP016I

Full message	ZDTP016I STOP Exit program(program name) and all associated exits
Explanation	Stop and disable all the exit points associated with the exit `ZDTAGTxx`.
System action	None
User response	None

ZDTP017I

Full message	ZDTP017I DISABLE Exit program(ZDTAGTxx) with Exit([exit name]).
Explanation	Disable the global exit point `[exit name]` associated with the exit ZDTAGTxx.
System action	None
User response	None

ZDTP019I

Full message	ZDTP019I Config block retrieved successfully.
Explanation	Indicates that CICS sensor configuration has been retrieved successfully after there was a problem in configuration block access. This message follows after ZDTP049S when the CICS transaction server sensor has been placed.
System action	CICS code module is initialized.
User response	None

ZDTP020I

Full message	ZDTP020I Active Sensors: <TX \| MQ \| DB2 \| DB2R \| SOAP \| CTG \| DB2Fetch \| DLI \| DLIR \| LE>.
Explanation	Indicates the CICS Sensors that are placed and active.
System action	None
User response	None

ZDTP021I

Full message	ZDTP021I CICS Sensors updated.
Explanation	Indicates that the CICS Sensors have been updated and the CICS code module honored the changes during DTAX 5 minutes cycle.
System action	None
User response	None

ZDTP022I

Full message	ZDTP022I Inquire DB2Conn failed. resp:<xx>, resp2:<xx>, rcode:<xx>.
Explanation	EXEC CICS INQUIRE DB2CONN has failed.
System action	CICS code module operation continues. No DB2 attachment details provided in the distributed trace.
User response	Determine the cause of the problem from `resp` and `resp2` codes. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP023I

Full message	ZDTP023I DTAX ICE interval set to: @@ minute(s).
Explanation	`DTAX ICE` value was changed.
System action	None, this is informational message.
User response	None

ZDTP024I

Full message	ZDTP024I Trace Hook is being enabled
Explanation	Indicates that the Trace hook is being turned on in the CICS code module.
System action	None, this is informational message.
User response	None

ZDTP025I

Full message	ZDTP025I Trace Hook is being disabled
Explanation	Indicates that the Trace hook is being turned off in the CICS code module.
System action	None, this is informational message.
User response	None

ZDTP026I

Full message	ZDTP026I Temporary Language Environment sensor is enabled for @@@@ minute(s).
Explanation	Indicates that the Language Environment sensor has been turned on for the current DTAX ICE interval. Note that the Language Environment sensor will be automatically turned off during the following DTAX ICE cycle.
System action	None, this is informational message.
User response	None

ZDTP027I

Full message	ZDTP027I Turn off Language Environment sensor because ICE timer expired
Explanation	Indicates that the Language Environment sensor has been automatically turned off at the end of the current ICE interval.
System action	None, this is informational message.
User response	None

ZDTP028I

Full message	ZDTP028I TX code : xxxx xxxx xxxx .
Explanation	Displays the Start TX sensor setting in Deep Monitoring in the web UI for the CICS regions.
System action	None, this is informational message.
User response	None

ZDTP029I

Full message	ZDTP029I DTAX User Command: LEENAB
Explanation	User issued a `DTAX LEENAB` command to turn on the Language Environment sensor.
System action	Language Environment sensor is turned on temporarily. CICS code module starts monitoring LE dynamic calls.
User response	None

ZDTP030I

Full message	ZDTP030I DTAX Status:V.R PLT-PTF AGT-PTF TRUE-STS XP RMI-STS ZDC-NAME AGT-ID ).
Explanation	DTAX STATUS console command was issued. This can be used for Automated Operations to see if Dynatrace Hooks/Exits are enabled. Field descriptions: `V.R`: DT Version `PLT-PTF`: PLT PTF `AGT-PTF`: Agent PTF `TRUE-STS`: TRUE Status `XPC-STS`: XPCREQ/C Status `RMI-STS`: RMIIN/R `ZDC-NAME`: zDC Name `AGT-ID`: Agent ID
System action	None, this is informational only.
User response	None

ZDTP031I

Full message	ZDTP031I DSA Freed at location : <addr>
Explanation	Indicates that the DSA at location `addr`, used by CICS code module, has been freed.
System action	DSA memory is freed.
User response	None

ZDTP131I

Full message	ZDTP131I Install of Soap Hook Completed Return Code: xxxx
Explanation	CICS code module has completed installing SOAP hook for SOAP request monitoring. Return code 0 indicates successful SOAP hook installation.
System action	CICS code module is ready to monitor SOAP events with successful SOAP hook installation.
User response	If the Return code is a non-zero value, SOAP hook installation has failed. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP132I

Full message	ZDTP132I Removal of SOAP Hook Completed Return Code: xxxx
Explanation	CICS code module has completed removing SOAP hook. Return code 0 indicates successful SOAP hook removal.
System action	CICS code module stops monitoring SOAP events if the SOAP hook has been removed successfully.
User response	If the Return code is a non-zero value, SOAP hook removal has failed. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP133I

Full message	ZDTP133I Install of MRO Hook Completed Return Code: xxxx
Explanation	CICS code module has completed installing MRO hook for multi region call monitoring. Return code 0 indicates successful MRO hook installation.
System action	CICS code module is ready to monitor MRO events with the successful MRO hook installation.
User response	If the Return code is a non-zero value, MRO hook installation has failed. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP134I

Full message	ZDTP134I Removal of MRO Hook Completed Return Code: xxxx
Explanation	CICS code module has completed removing MRO hook. Return code 0 indicates successful MRO hook removal.
System action	CICS code module stops monitoring MRO events if the MRO hook has been removed successfully.
User response	If the Return code is a non-zero value, MRO hook removal has failed. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP135I

Full message	ZDTP135I Install of ERM Hook Completed Return Code: xxxx
Explanation	CICS code module has completed installing ERM hook for DB2 call monitoring. Return code 0 indicates successful ERM hook installation.
System action	CICS code module is ready to monitor DB2 calls from the CICS region with the successful ERM hook installation.
User response	If the Return code is a non-zero value, ERM hook installation has failed. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP136I

Full message	ZDTP136I Removal of ERM Hook Completed Return Code: xxxx
Explanation	CICS code module has completed removing ERM hook. Return code 0 indicates successful ERM hook removal.
System action	CICS code module stops monitoring DB2 calls if the ERM hook has been removed successfully.
User response	If the Return code is a non-zero value, ERM hook removal has failed. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP137I

Full message	ZDTP137I Install of PL1 Hook Completed Return Code: xxxx
Explanation	CICS code module has completed installing PL1 hook for monitoring PL1 dynamic calls. Return code 0 indicates successful PL1 hook installation.
System action	CICS code module is ready to monitor PL1 dynamic calls with the successful PL1 hook installation.
User response	If the Return code is a non-zero value, PL1 hook installation has failed. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP138I

Full message	ZDTP138I Removal of PL1 Hook Completed Return Code: xxxx
Explanation	CICS code module has completed removing PL1 hook. Return code 0 indicates successful PL1 hook removal.
System action	CICS code module stops monitoring PL1 dynamic calls if the PL1 hook has been removed successfully.
User response	If the Return code is a non-zero value, PL1 hook removal has failed. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP139I

Full message	ZDTP139I Install of <COBOL routine> Hook Completed Return Code: xxxx
Explanation	CICS code module has completed installing COBOL hooks IGZCFCC, IGZCLNK and IGZXFCAL (indicated by “COBOL routine”) for monitoring COBOL dynamic calls. Return code 0 indicates successful COBOL hooks installation.
System action	CICS code module is ready to monitor COBOL dynamic calls with the successful COBOL hooks installation.
User response	If the Return code is a non-zero value, COBOL hook installation has failed. Please contact a Dynatrace product expert via live chat within your environment.

ZDTP140I

Full message	ZDTP140I Removal of COBOL Hook Completed Return Code: xxxx
Explanation	CICS code module has completed removing COBOL hook. Return code 0 indicates successful COBOL hook removal.
System action	CICS code module stops monitoring COBOL dynamic calls if the COBOL hook has been removed successfully.
User response	If the Return code is a non-zero value, COBOL hook removal has failed. Please contact a Dynatrace product expert via live chat within your environment.